Body Cab Type: Extra/Super/ Quad/Double/King/Extended
Body Class: Pickup
Brake System Type: Hydraulic
Displacement CC: 2700.0
Displacement CI: 164.76410905577
Displacement L: 2.7
Drive Type: 4x2
Engine Configuration: In-Line
Engine HP: 150
Engine KW: 111.8550
Engine Model: 3RZ-FE
Fuel Type Primary: Gasoline
GVWR: Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Make: TOYOTA
Manufacturer: TOYOTA MOTOR MANUFACTURING, CALIFORNIA, INC.
Manufacturer Id: 1063
Model: Tacoma
Model Year: 2002
Note: Chassis: With 1/2 ton Independent Front Suspension , Double Cab
Plant City: Fremont
Plant Company Name: TABC Inc.
Plant Country: United States (USA)
Plant State: California
Series: RZN191L/RZN196L/VZN195L
Trim: DELUXE
Vehicle Type: TRUCK
Wheel Base Type: Extra Long
Model year
COMPONENT
Complaint
2006
SUSPENSION
DURING SOME UNDER BODY INSPECTIONS PRIOR TO PERFORMING SOME BRAKE REPAIR, I NOTICED A CRACK IN THE REAR DRIVERS SIDE FRAME IN FRONT OF THE SHOCK MOUNT. I CONTACTED THE LOCAL DEALERSHIP AND THEY CONFIRMED A PERFORATION AND CRACK ACROSS BOTTOM PORTION OF C-CHANNEL IN FRAME. THE DENIED ANY RESPONSIBILITY AND CLAIMED THE CRACK WAS DUE TO SEVERE OFFROADING, WHICH IS ABSOLUTELY INCORRECT. I ASKED THEM TO PROVE THAT THEORY AND THEY COULD NOT. THEY WOULD ONLY PROVIDE A REFERENCE NUMBER AND THAT I COULD CONTACT THEIR LEGAL DEPARTMENT. I AM NOW STUCK WITH A 6-ISH YEAR OLD VEHICLE THAT CANNOT BE DRIVEN. *TR
2002
SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY:LEAF
THE TOYOTA TACOMA HAD A REAR AXLE WRAP UP, THIS WAS WHERE THE TWO PIECE DRIVESHAFT BECOMES LOOSE AT THE SPLEEN AND CAUSED A CLUNG OR LOOSENESS IN THE DRIVE LINE, WHICH CAUSED UNDUE STRESS ON THE ENGINE AND THE TRANSMISSION, WHICH COULD CAUSE THE DRIVESHAFT TO BREAK AT THE YOKE AND FALL TO GROUND, CAUSING AN ACCIDENT. THIS WAS GETTING PROGRESSIVELY WORSE ON THE TRUCK. I HAVE TAKEN THE CAR UNDER WARRANTY TO THE DEALER. THEY DISMISSED IT AS NORMAL. THIS WAS NOT NORMAL. IT WAS A FLAW IN THE SPRINGS THEY USED ON THE TRUCK.*AK