I REPLACED A BLOWN 10 AMP FUSE ON A DEALER INSTALLED TRAILER WIRING HARNESS ADAPTER. 15-20 MINUTES LATER I NOTICED A FIRE COMING FROM DRIVER'S SIDE REAR LIGHT ASSEMBLY. REMOVED FUSE, REMOVED LIGHTING ASSEMBLY, PUT OUT FIRE. IN LOOKING AT DAMAGE, TRAILER HARNESS ADAPTER WAS MELTED ALONG WITH SEVERAL WIRES ATTACHED TO IT. FOAM BUMPER PADDING CAUGHT FIRE AND WAS MELTED. NO VISIBLE BODY DAMAGE. *TR
2010
ELECTRONIC STABILITY CONTROL
WAS ON HIGHWAY HEADING INTO CONSTRUCTION ZONE , TAPPED BRAKES TO DISENGAGE CRUISE CONTROL, CC DID NOT DISENGAGE. HEAVILY PRESSED BRAKES, CC WOULD NOT DISENGAGE. VEHICLE IS ACTUALLY ACCELERATING EVERY TIME I STEP ON BRAKE. ABS/ESC LIGHTS COME ON. ULTIMATELY ABLE TO DISENGAGE CC ON THE COLUMN BUT NOT BEFORE ACCELERATING TO 80+MPH HEADING INTO WALL OF TRAFFIC MERGING FROM THREE TO ONE LANES AND SLOWING TO 45MPH FOR CONSTRUCTION ZONE. 20 MILES LATER I PULL INTO REST AREA HOPING TO CLEAR ERROR LIGHTS; TURNED CAR OFF AND BACK ON - COULDN'T GET VAN OUT OF PARK. AFTER ABOUT 100+ RESTARTS FINALLY ABLE TO GET VAN INTO DRIVE. LIMPED HOME, FLATBEDDED TO DEALERSHIP NEXT MORNING. STILL NO ACKNOWLEDGEMENT OF ISSUE FROM SERVICE DEPARTMENT 24 HOURS LATER. *TR
